Engine Models
-
|
STEAM ENGINE WITH BOILER |
| Code:GP - 429.2 |
Operation of a commercial steam engine is well illustrated with this working model. The large size unit is provided with a horizontal boiler with a whistle, safety valve, steam gauge, on metal base. Operates on 220V A.C. 50Hz.
|
-
 |
GAS TURBINE/TURBOJET ENGINE |
| Code:GP - 431.1 |
The section cut model is constructed of light and strong metal showing air intake, axial flow, double stage compressor, fuel supply, combustion chamber, turbine rotar, jet thrust, exhaust etc. Complete on base, with printed diagram showing working.
|
-
 |
SECTIONAL MODEL OF 4-STROKE CYCLE PETROL ENGINE |
| Code: GP - 434.1 |
All parts made in aluminium alloy and gun metal. Ignition is shown by means of a minature bulb. Carburetor or fuel supply also sectioned. With a crank handle for manual operation. Mounted on polished wooden base. Height overall 38cm approx. With Instructions.
|
-
 |
SECTIONAL MODEL FOR 4-STROKE CYCLE DIESEL ENGINE |
| Code: GP - 434.3 |
All parts made in aluminium alloy and gun metal. Ignition is shown by means of a miniature bulb. Fuel supply also sectioned. With crank handle for manual operation. Fitted on polished wooden base. Overall height about 43cm. With Instructions.
|
-
 |
STEAM ENGINE SECTIONAL
DEMONSTRATION MODEL |
| Code: GP - 435.1 |
Locomotive design showing cross section of the piston and sliding valve as positioned in the steam chamber (Cylinder), clearly visible through air tight glass front and movement of these parts are smooth enough to demonstrate working even by blowing, Other parts are also clearly visible such as crankshaft, valve control, drive wheel etc. All brass parts (except fly wheel) are C.P., mounted on heavy metal base Synthetic Hammer finish.
Overall Dimensions: 375 x 95 x 160mm l x w x h apx.
|
