PIPETTES/FILLERS/ROD/FUNNEL HOLDERS
-
 |
PIPETTE, GRADUATED |
| Code:GP - 1482 |
Made of Borosilicate glass, graduated, straight form.
(Capacity x sub. division in ml.)
| Type |
Capacity ml |
| .01 |
0.1 |
| .02 |
0.2 |
| .03 |
1 |
| .04 |
2 |
| .05 |
5 |
| .06 |
10 |
| .07 |
25 |
GP-1483
PIPETTE, GRADUATED (Same As Above, Made Of Soda Glass)
|
-
 |
PIPETTE, DROPPING |
| Code:GP - 1484.1 |
Straight form, with rubber teat.
Overall Size x 110mm
|
-
 |
PIPETTE PUMP |
| Code:GP - 1485 |
A fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acid & alkalis and can be easily disassembled for thorough cleaning.
| Type |
Capacity (ml) |
| .01 |
2 |
| .02 |
10 |
| .03 |
25 |
|
-
 |
PIPETTE FILLERS |
| Code:GP - 1490.1 |
For use with bulb and cylindrical pipettes up to 25 cm³ Simple and easy to use with finely adjustable thumb wheel, no possibility of sucking back of liquid into filler. They have a flexible pipette holding socket to minimise possible damage to pipette and a special liquid release value. Ideal for bromine trichloromethane, tetrachloromethane, acids and alkalis.
|
-
 |
REAGENT RESERVOIR |
| Code:GP - 1495.3 |
Moulded in polypropylene, this autoclavable reagent reservoir is helpful for multi-channel pipettes to be used into microtiter plates.
| Type |
Capacity (ml) |
| .01 |
75 ml |
|
-
 |
RODING GLASS |
| Code:GP - 1503.1 |
Made of Borosilicate glass, 1 to 10mm Dia. in 1.5 metre length.
GP-1503.2
RODING GLASS (Same As Above, Made Of Soda Glass but Dia 4 to 7mm)
|
-
 |
FUNNEL HOLDERS |
| Code:GP - 1515.1 |
Non-corrosive funnel holders have outer ring to hold funnels with 3"-6" dia while the removable inner lid holds smaller funnels with 1"-3" dia.
Single Funnel Holder
Double Funnel Holder
|
-
 |
SEPARATORY FUNNEL HOLDER |
| Code:GP - 1515.2 |
This non-corosive separatory funnel holder, moulded in polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip in rods having dia ½” or 3/8”.
|
